As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Read our affiliate disclosure.
Short answer: Rain Design says the mStand fits all MacBooks, including the 16 in MacBook Pro, at a fixed 5.9 in. The iLevel2 adjusts from 5.4 to 7.9 in with a slider. The BESIGN LS03 is a fixed aluminum riser for 10–15.6 in laptops, so it suits the Air and the 14 in Pro but not the 16 in Pro. If you work with the lid closed on an external monitor, a vertical dock is the other route.
Spec
Rain Design mStand
Rain Design iLevel2
BESIGN LS03
Twelve South BookArc Flex
Lift / height
5.9 in (stand height (maker))
5.4–7.9 in (stand height (maker))
5.7 in (raise height (retailer listing))
not published
Supported laptops
all MacBooks; most notebooks; 16-in MacBook Pro sits securely (maker FAQ)
all notebooks (maker FAQ)
10–15.6 in
up to 1 in thick, up to 16 in
Max load
not published
not published
8.8 lb
not published
Material
single piece of anodized aluminum
anodized aluminum
aluminum alloy
aluminum
Stand weight
3 lb
3.5 lb
not published
0.53 lb
Tier
Mid-range
Mid-range
Budget
Mid-range
All three raise the screen 5.4–7.9 in. For many people that's less than the height chart suggests, so run your own numbers in the height calculator. If you need more lift, the adjustable stands go higher. At these heights the MacBook keyboard is too high to type on, so plan on a separate keyboard; see using a stand without an external keyboard. All three are aluminum; how that compares with other materials is in aluminum vs plastic vs wood. For a closed MacBook beside a monitor, the Twelve South BookArc Flex takes laptops up to 16 in and 1 in thick — see vertical stands, or weigh closed against open in vertical vs horizontal.
Picks
Mid-range · fixed riser
Rain Design mStand
Lift 5.9 in
Load not published
all MacBooks; most notebooks; 16-in MacBook Pro sits securely (maker FAQ)
Good fit for: a MacBook that stays on one desk; an external keyboard tucked under the stand.
Variant
Silver (10032)
Lift / height
5.9 in (stand height (maker))
Angles
not published
Max load
not published
Supported laptops
all MacBooks; most notebooks; 16-in MacBook Pro sits securely (maker FAQ)
Platform / footprint
10 x 7.5 in
Lip height
not published
Stand weight
3 lb
Folded size
not published
Material
single piece of anodized aluminum
Ventilation / fans
tilted design, aluminum acts as heat sink (maker)
Warranty
not published
Limits: one fixed height of 5.9 in; load rating not published; 3 lb — not a travel stand.
Skip it if… you need more than about 6 in of lift; you carry the stand in a bag.