As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Read our affiliate disclosure.
Short answer: both get a screen to eye level. A stand does it with the laptop's own screen and costs the desk space of a riser plus a keyboard. An external monitor is bigger and usually easier to set at eye level on its own stand; the laptop then sits closed in a vertical dock or open beside it as a second screen.
Laptop on a stand
External monitor, laptop docked
Screen size
the laptop's
the monitor's
You also need
keyboard and mouse
monitor, cable, keyboard and mouse, vertical stand
Travels
with a folding stand
no
Example here
Rain Design mStand (5.9 in)
Twelve South BookArc Flex (≤ 1 in thick, ≤ 16 in)
Spec
Rain Design mStand
Twelve South BookArc Flex
OMOTON Vertical Laptop Stand
Type
fixed riser
vertical
vertical
Lift / height
5.9 in (stand height (maker))
not published
not published
Supported laptops
all MacBooks; most notebooks; 16-in MacBook Pro sits securely (maker FAQ)
up to 1 in thick, up to 16 in
0.55–2.71 in thick
Footprint
10 x 7.5 in
8.43 x 3.6 in
5.9 x 3.7 in
Tier
Mid-range
Mid-range
Budget
If you keep both screens, the layout rules (main screen in front, the other within 35°) are on the dual-monitor page. Docking closed vs raising open is covered in vertical vs horizontal. The eye-level target applies to a monitor too — see laptop stand ergonomics. For the laptop-only route, check your lift with the height calculator.
The two
Mid-range · fixed riser
Rain Design mStand
Lift 5.9 in
Load not published
all MacBooks; most notebooks; 16-in MacBook Pro sits securely (maker FAQ)
Good fit for: a MacBook that stays on one desk; an external keyboard tucked under the stand.
Variant
Silver (10032)
Lift / height
5.9 in (stand height (maker))
Angles
not published
Max load
not published
Supported laptops
all MacBooks; most notebooks; 16-in MacBook Pro sits securely (maker FAQ)
Platform / footprint
10 x 7.5 in
Lip height
not published
Stand weight
3 lb
Folded size
not published
Material
single piece of anodized aluminum
Ventilation / fans
tilted design, aluminum acts as heat sink (maker)
Warranty
not published
Limits: one fixed height of 5.9 in; load rating not published; 3 lb — not a travel stand.
Skip it if… you need more than about 6 in of lift; you carry the stand in a bag.