Laptop stand height calculator: how many inches of lift do you need?
OSHA's rule is "the top of the monitor should be at or slightly below eye level." This calculator works out where your eyes are and where the top of the laptop screen is with the laptop flat on the desk. The gap between the two is the lift your stand needs. Every assumption is shown and can be changed.
How it works
- Target. The top of the screen sits at your eye height minus 1 in, following the OSHA Computer Workstations eTool: "at or slightly below eye level". OSHA doesn't give a number for "slightly", so the 1 in is our assumption. The tool also shows the angle to the screen centre against OSHA's 15–20°.
- Eye height. Your measurement wins. Without one, seated eye height from the floor is estimated as 0.701 × your height (range 0.684–0.717), plus shoes. We computed the ratio from the ANSUR II body measurements of 6,068 US adults (popliteal height plus sitting eye height). Standing eye height is 0.936 × your height (Drillis & Contini, via Winter).
- Screen. A 16:10 screen is 0.530 × its diagonal tall. Add the bezel and hinge, tilt the lid back, and add the base: that gives the top of the screen above the desk.
- Stands. Each stand's published lift is compared with what you need. Makers measure differently: Roost quotes "screen lift", the others the stand's height, so each row shows its basis. Stands with no published lift are listed as "not published".
Reading the result: most people need more lift than a fixed riser gives, and lifts that high need an external keyboard. The thinking behind the target is in laptop stand ergonomics. Ready-made figures by height are in the height chart. Standing at a desk needs more lift — see stands for a standing desk. Ranges side by side are on the adjustable stands page, and typing without a keyboard is covered in laptop stands without an external keyboard.
Specs verified: November 2026 · Updated 2026-11-18 · How we research